Проигрыватель виниловых дисков Music Hall mmf 11.1 w/o cartridge, black - без картриджа, черный

Music Hall mmf-11.1 представляет собой стол, состоящий из четырех платформ, изолированных друг от друга шестью сорботановыми амортизаторами. Отличительные особенности данной модели - тонарм с регулируемой прижимной силой, задемпфированный микролифт, антискейтинг, проводники из сверхчистой меди, позолоченные RCA-разъемы. Аппарат оснащен динамически сбалансированным двухскоростным синхронным двигателем, который управляется с помощью микропроцессора. Проигрыватель имеет два режима работы: 33 и 45 оборотов (скорости меняются нажатием кнопок). В комплект входит прозрачный защитный чехол. В отличие от модели mmf-11, здесь крепление опорного подшипника перенесено на изолированный стол, добавлены магнитные левитационные опоры.

 
679990 руб.
145340
Под заказ
+

feature list

  • music hall’s unique quadruple-plinth design w/sorbothane vibration isolation
  • one-piece Project ‘9cc Evolution’ carbon fiber tonearm
  • the arm uses four hardened Swiss ABEC 7 ball races in an inverted bearing design
  • tonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectors
  • counterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damper
  • fully adjustable azimuth, VTA, and dampened arm lift
  • exclusive microprocessor electronic speed controlled dual motor single flywheel drive system
  • 33 1⁄3 and 45 rpm speed change at the touch of button
  • motors and flywheel assembly are isolated on mass loaded resonant sink connected to the lower plinth
  • the dual motor flywheel system sits on the left side of the turntable thus eliminating all motor and belt vibration from the cartridge
  • magnetic-levitation adjustable isolation feet
  • inverted ceramic main bearing for super quiet fluid operation
  • thick acrylic platter
  • removable acrylic dustcover
  • high quality, gold RCA connectors with detachable phono cable
  • low noise fully manual belt-drive design, dustcover, 45rpm adaptor
  • ships securely in a substantial wood box
  • excellent instruction manual and easy assembly

specifications

speed of turntable: 33 1/3 or 45 r.p.m.
change speed electronically, luminous buttons
deviation speed < ±0.1%
variance speed < ±0.08%
mechanical distance > -45dB
electrical distance > -65dB
drive silicone belt over pulley
motor 2 x synchronous motors; the motor is controlled via microprocessor
platter acrylic (11.8 in., 300 mm) weight – (7.4lbs., 3.35 kg)
power switching power supply (90 – 246 VAC, 47-63Hz) type EU, UK,USA
electric input 23W DC
effective arm length 9in. (230 mm)
effective arm mass 8.5 g
mounting distance 8.3 in (212 mm)
overlap .71 in (18 mm)
angle crank 24°
course zero error angle ø 130.5, ø 243.7
force on the tip 0-3 g
plinth material MDF
belt material silicone rubber
product dimensions 21.3″ x 13.8″ x 7.8″
(540 x 350 x 197 mm)

39.5 lbs. (17.9 kg)